Merchandise Description

S&S electronic jacquard weaving looms are to utilise automatic controls to change mechanical variety jacquard weave machine. They simplify the process of manufacturing textiles with complicated designs. The SEJ3208S-19456 Digital Jacquard Machine is suitable to make big and weighty patterns material and is relevant to numerous weaving looms, these kinds of as Rapier Loom , Air Jet Loom, h2o jet loom, Shuttle Loom, Projectile Loom.

Relevant to:Rapier loom, air jet loom, water jet loom, shuttle loom, projectile loom with any reed width.
Weaving Products:
Label, tie, upholstery cloth, curtain cloth, shading material, couch fabric, bedding cloth, towel, carpet, velvet, garment fabric, sari cloth, silk cloth, CZPT fabric etc.
SEJ3208S
Hooks: 19456
Drop Opening: fifty five-120mm
Max Pace: 550 rpm

S&S packaging using cartons, fumigated wooden pallet, fumigated picket box packaging, and so on.
Module-relevant goods: we use cartons with plastic pallets inside the containers and wrapping movies in the outer bins.
Selvage jacquard tools: packed in fumigated wooden box.
Digital jacquard products: packed by wooden pallet and water-resistant wrapped film.

ZheJiang S&S Intelligent Science and Technology Co.,Ltd. is a large-tech enterprise with
registered cash of twenty million yuan, addresses an spot of 104 mu, workshop and business office regions are
about 52000 sq. meters. It is a high-tech organization which is engaged in substantial-finish jacquard weaving gear and its essential elements analysis, advancement, creation, procedure
and services etc. It has excellent electronic jacquard device production capacity in the planet, and
is 1 of China’s industrialization base of digital jacquard machine. Buyers are all in excess of
the entire world.

S&S’s services teams are all above the globe. It has established several abroad workplaces to offer buyers with all-spherical
companies so as to fulfill customers’ requirements. We are on call at the 1st time and provide skilled and ideal companies
to international customers, troubles encountered in generation will be solved instantly.
In get to provide a lot more convenience to consumers, our engineers will provide on-site installation direction companies and provide
coaching for relevant specialized workers.
Troubles associated to the procedure of merchandise, abroad buyers can seek the advice of nearby brokers for support. If the difficulty nonetheless can not
be solved, then buyer could get in touch with us by means of Internet or telephone for more assist. If needed, we will arrange professional
engineers to provide on-site support.

Q: Are you a manufacture or buying and selling company?
A: We are a manufacturer. We have more than 20 years’ knowledge in research, improvement and production of jacquard
and relevant accessories. )

Q: In which is your factory positioned? How can I pay a visit to it?
A: Our factory is positioned in ZheJiang , China. It is about 5 hours driving from HangZhou, 6 hrs from ZheJiang port, welcome to
visit us.

QHow about our quality and following support?
A: We carry out quite strict top quality management in each production approach, even one hundred% quality evaluation and take a look at ahead of
shipping and delivery.
Our right after-service group can supply you specialized assist on set up or on the problems that you come across in the use.
In India, we can offer the service on location, and other locations by video clip.

Q: Following an purchase is put, when can you ship?
Typically about thirty times. If we have inventory, we can prepare cargo within 7 times. Kindly please be famous that our
creation direct time relies upon on specific products and merchandise portions.

Q: What is payment terms?
A: We favor TT, thirty% in advanced payment+70% paid ahead of cargo.but also take L/C.

Q: Which method of transport would be better?
A: Normally we recommend to ship by sea to preserve freight cost. But we also can adhere to other transportation approach you ask.

Q: I want to be your agent in my nation, is it okay?
A: Indeed, no dilemma. We are looking ahead to extended-time period associates with high capacity.

Searching for perfect Substantial Velocity Air Jet Loom Jacquard Company & provider ? We have a broad selection at very good prices to aid you get imaginative. All the Substantial Performance Air Jet Loom Jacquard are high quality confirmed. We are China Origin Manufacturing facility of Terry Air Jet Loom Jacquard.
 

###

###

###

###

Different types of drive chains

Drive chains are an important part of many different types of machinery. In this article, we’ll cover a variety of different types, from square links to engineered steel. From there, we’ll discuss different types of chains, such as double and leaf chains. Let’s take a closer look at each one. Once you know what kind of chain you’re looking for, you can make a buying decision. If you’re not sure where to start, read on to learn more about these types of chains, what to look for when choosing, and how to choose the right chain for your specific application.

Engineering Steel Chain

Engineering steel chains are widely used in conveyors, bucket elevators, tensioning links, transmission chains, etc., and have the characteristics of high strength, low friction, and good shock resistance. Early models of these chains were developed for difficult-to-convey applications. They were originally made of all-steel components with flanged rollers made of cast iron. They then increase in size, strength, and spacing in response to the heavy-duty requirements of the industry.
Today, these chains are used in a wide variety of applications, including tough oil drilling operations and forklifts. They offer excellent durability and high power transfer and are available in a variety of materials. They are also ideal for harsh environments such as harsh oil drilling. Their high-strength steel construction means they can handle harsh operating conditions. Their durability is an essential feature of any chain, and CZPT Chains offers a full line of engineered steel chains to meet your exact specifications.
A drive chain made of engineered steel consists of several components: links, pin joints, and sprockets. This allows them to carry heavy loads with minimal stretch. Due to its internal mechanical advantage, the chain runs around the sprockets with almost 100% efficiency. Also, the chain is made of special steel that can withstand certain conditions. They are available in different alloys and grades. If you have any questions, please feel free to contact us.
Roller chain wear is a major problem for conveyor and drive chains. In these cases, the rollers of the chain are more prone to wear than the bushings, so lubrication is essential. Many chains are designed to work with little or no lubrication. Finally, material selection is an important factor in the design of engineered steel conveyor chains. These factors will help ensure that the chain stays in good shape.

Conveyor Chains with Square Links

There are two basic types of conveyor chains. The first is the square chain, commonly used in cranes and hoists. It’s cheap to manufacture but more prone to overload. The second is a chain that uses hook joints or detachable links. These are used for short-term power transmission and have a lubricating effect. Usually, they are made of malleable iron but can be more expensive.
Another type of chain is the removable steel chain. For moderate loads, this is an easy-to-install option. The closed end of the tab should face the sprocket. It is very important to maintain the alignment of the chain relative to the sprockets. The chain should be adjusted to suit the load before installation. It is important to keep the chain lubricated to prolong its life.
Steel chains offer a wider selection of materials and heat treatments. This chain is also more accurate than its counterpart. Steel bushing chains are less expensive but require more frequent lubrication. Steel roller chains are often used for long conveyor centers or high loads. However, lower friction requirements require lower strength chains. This means that chains with square links are a better choice for smaller conveyors. But this style has its drawbacks.
Bushing chains are made of steel and are an excellent alternative for small-scale applications. The pins are silent and prevent tooth damage. Bushed roller chains are also used to a certain extent as conveyor chains. However, the main advantage of the bushing roller chain is that it does not make any noise at all. Bushed roller chains are made of alloy steel and are suitable for very low-speed applications.

double chain

Double-strand roller chain, also known as a double-strand, consists of two rows of single-strand links. It has high impact strength, low weight, and a small form factor. Duplex roller chains are manufactured using CZPT technology, which uses solid rollers to improve sprocket tooth rotation and reduce shock loads. During the manufacturing process, the metal is heat-treated to increase strength and reduce corrosion.
A single chain is designed for a single sprocket, while a double chain consists of two identical chains connected side by side. Double chains are more durable than simple chains because double rollers contain roller bearings, pins, and other components. Simplex drive chains can handle high loads, while duplex drive chains are designed for medium-duty applications.

leaf chain

Blade chains are used in reciprocating devices such as forklifts. They are also used in machine tools for counterweight chains. Leaf chains come in a variety of lengths, usually with female or male ends. Leaf chains can be manufactured in even or odd pitches and are ideal for lifting and balancing. This article will introduce some key uses of leaf chains in drive chains. Additionally, we’ll discuss how they are made and how they behave in applications.
Most drive chains today are made from leaf chains. These chains are designed to increase the strength of the chain. However, they are less expensive than other types of chains. You can also purchase specialized leaf chains for certain applications. CZPT Chain also offers custom leaf chains for your unique needs. Leaf chains are commonly used in forklifts, material handling, and lifting applications. They are usually made from high-quality components. The BL1688 Leaf Chain has 8 x 8 laces and is sold in 10-foot boxes or 25- to 100-foot reels. The leaf chain can be cut as needed.
When selecting a leaf chain for a specific application, consider the minimum tensile strength of the chain. The minimum breaking strength must be high enough to protect the worker or machine, but must also be legal for the type of machine. Most manufacturers publish this minimum strength requirement. To make the most durable leaf chain, design engineers must consider the ISO4347 standard when choosing the right leaf chain. Leaf chain manufacturers tend to exceed international standards by about 20%.

roller chain

Roller chains are made from a variety of materials. Some common materials include steel and stainless steel. The most suitable material depends on cost, environmental conditions, and horsepower transmission design. Chain manufacturers can optimize the material for the intended use. Depending on its size, spacing, and special construction techniques, it can be made lighter or heavier. This is an advantage for applications in noise-sensitive environments. Below are some examples of common uses for roller chains.
The wear of the components in a roller chain is an unavoidable part of its operation. The amount of elongation depends on factors such as lubrication, load, and the frequency of articulation between the pin and bushing. Manufacturing critical wear parts require careful attention to detail. Proper raw materials, manufacturing, and assembly are critical to product performance and longevity. If these components aren’t of high quality, they won’t last as long as the chain should.
The industry recommends measuring the wear elongation of the roller chain to determine when it needs to be replaced. Proper safety procedures must be used to measure chain tension. The tight span of the chain shall be measured by applying the measuring load specified by ANSI. A correctly measured roller chain is safe to use. For motorcycles, the chain is bigger and stronger. Often, toothed belts are replaced by shaft drives because they are less noisy and require less maintenance.
Tensile strength is the most commonly used measurement method for roller chains. This measurement represents the amount of load the chain can withstand before it breaks. Fatigue strength is another measure of durability. Fatigue strength measures how long a roller chain can withstand long-term use before failing. These two measurements are closely related and maybe the same or different. In addition to tensile strength, fatigue strength is a useful factor to consider when purchasing a chain.

editor by czh 2022-11-28